Administrative Tools folder is empty

When you open the Administrative Tools folder in the Start Menu, the shortcuts in the folder may be missing.

This happens due to one of these reasons:

• The Administrative Tools shell folder path is incorrectly set.
• The Administrative Tools shortcuts are deleted accidentally.

For windows XP

• Start Regedit.exe and navigate to the following locations one by one:

HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion\Explorer \ User Shell Folders

-and-

HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Shell Folders

• Delete the value named Common Administrative Tools (if present).
• Close Regedit.exe and restart Windows.

OR

Use this tool to fix the problem:

Download LInk: http://www.mediafire.com/?k22ftvywqzz

For Windows Vista

Download the utility

Downlaod Link:http://www.mediafire.com/?ezm40dgdgda

Fix Master Boot Record in Windows Vista

 

If you are having trouble getting Windows Vista to startup due to a corrupted Master Boot Record, you can use the Windows Recovery Tools to restore it. To do this, perform the following steps:

   1. Start your computer using the Windows Vista installation disc.

   2. Choose Repair your computer from the main screen.

   3. Choose the operating system you wish to repair and click Next.

   4. Click Command Prompt on the next screen.

   5. At the command prompt, type bootrec.exe /fixmbr.

   6. A message should appear stating The operation completed
     successfully.

Try to start your computer again and pray it will fix the issue.

Remove programs completely and easily using 'Your uninstaller' utility

 You've probably encountered some stubborn programs that just won't uninstall at all or uninstall completely, right? And, more often than not, when you use the Windows Add/Remove Program utility, there are remnants or "artifacts" of the program left behind in the system registry and on your hard drive that are no longer needed.

These useless items will bog your PC down and, over time, it will get slower and slower lugging around this useless baggage - unexpected errors and frequent crashes may also occur because of this!

Your Uninstaller! will solve these problems. It removes any installed program and clears all the left-behind traces - no more 'junk artifacts' remaining. Whenever you uninstall a program, Your Uninstaller! removes it completely! This application will not leave absolutely anything after uninstalling your programs.

Here are some key features of "Your Uninstaller! Pro":

· Remove programs that could not be removed by Add/Remove Program.
· Advanced Uninstall mode to fix Microsoft Installer problems.
· System wide scan for unused files and registry keys after normal uninstall.
· Hunter mode uninstall, hunts the programs and kill / uninstall / delete them.
· Groups installed applications with various groups.
· Never uninstall "must have" applications. (options)
· Shows all applications installed on your computer with different views.
· Uninstalls screen savers.
· Built-in Disk Cleaner helps you find and remove unnecessary files on your disk to save space and make computer faster!
· Built-in Trace Eraser removes surfing traces so no one knows your hobby.
· Built-in IE Context Menu Cleaner cleans the context menu of Internet Explorer.
· Built-in take full control of Window startups.
· Built-in helps you keep your Start Menu clean.
· Backup and restore installed-applications.
· Powerful "Type and Go" search feature allows you quickly find the program you are about to uninstall.
· Detect invalid installations and remove them with one click.
· Force removal of uninstall related entries in the registry (care to use!).
· Quickload mode loads programs extremely fast.
· Give detailed report about any installed applications.
· Export programs list to file or printer

Requirements:

· 800x600 screen resolution with 256 colors
· 30 MB free disk space
· 133 MHz Intel Pentium or AMD K5 processor
· 64 MB RAM

Download link:

http://www.mediafire.com/?jfrjmzbmcyd

Find out your hardware specification using CPU-Z utility

CPU-Z is a freeware that gathers information on some of the main devices of your system.

CPU

• Name and number.
• Core stepping and process.
• Package.
• Core voltage.
• Internal and external clocks, clock multiplier.
• Supported instructions sets.
• Cache information.

Mainboard

• Vendor, model and revision.
• BIOS model and date.
• Chipset (northbridge and southbridge) and sensor.
• Graphic interface.

Memory

• Frequency and timings.
• Module(s) specification using SPD (Serial Presence Detect) : vendor, serial number, timings table.

System

• Windows and DirectX version.

Download Link:http://www.mediafire.com/?ciyczhdkgtm

Autorun Virus Remover

Autorun Virus Remover provides protection against any malicious programs trying to attack via USB drive. When a USB device is inserted into your computer, Autorun Virus Remover will automatically scan it, block and delete autorun virus, trojans, and malicious code. Also, it can detect and remove USB virus such as autorun.inf virus in your computer. Autorun Virus Remover can also remove the autorun virus due to which you can't open your hard disk and USB drive (Pen drive, Memory card) by double clicking. Autorun Virus Remover USB antivirus software to permanently protect offline computer against any USB virus without the need for signature updates. This light and easy to use solution is compatible with all software and doesn't slow down your computer at all.

Download Link:http://www.mediafire.com/?o1ieanvwlcu

Minimum System requirements for Linux(video tutorial)

Download E-Book Microsoft Office 2010 Technical Preview

 Download E-Book Microsoft Office 2010 Technical Preview.

Download Link:http://www.mediafire.com/?ymjnytet4kf

Newfolder.exe Virus removal Tool

New Folder.exe virus affects your system by:

• Disabling Task Manager.                                        
  
• Disabling Registry Editor.
• Creates a startup entry to start upon system start and Creates its own exe files in Shared Documents folder which appear like ordinary folders.
• Disables Folder Options Uses your 50% or more processor.

You can see that the folders in Shared Documents have an exe extensio
Download the Newfolder.exe virus Fix tool from here:http://www.mediafire.com/?1ftcenngw3x

Internet Explorer Tweaker

IE Tweaker is a freebie released by IEtips that will help to fix various issues with Internet Explorer. It has also a great number of fixes/tweaks that will help you to enable/disable any options with ease and without getting in to registry. IE Tweaker will be a great utility for those, who don’t want to play with the Windows registry.

IE Tweaker Features:
Browsing Options – This menu option helps you to quickly turn off/on the following:

Smooth Scrolling, Clear type font, Animation, Sounds, Picture Display, Automatic Image resizing

Clear Junk Files – This option will help you to quickly remove all the temporary IE files, cookies, history, passwords, and AutoComplete data.
 
 Tweak IE – Tweak IE menu has the following tabs:

Basic Tweaks – Offers you the basic tweaks such as Turn off/on Menu bar, Favorite bar, Tabbed browsing, Full screen mode, Caret Browsing support etc.,

Browser Menus – Helps you to disable/enable the Browser Menus

Toolbars – Helps you to hide/unhide the various options on the bars and also the bars itself such as Status bar, command bar etc

Control Panel – Helps you to hide/unhide the various tabs in Tools -> Internet Options.

Advanced – Helps you to Turn off/on various options such as Compatibity view etc., and also allows you to change the IE Title, and Default download directory options.

Restrictions – This menu option has the following tabs:

- Restrictions – Provides you various restriction optionss such as Changing default search provider, Add-ons management, Autocomplete features etc.,

- Settings – Restricts the users to change various settings.

- Security – Allows you to enable/disable options such asInPrivate Browsing, Filtering etc.,

- Repair – Repair menu option provides you various options to repair/fix various issues that you have with Internet Explorer.

Download Link:http://www.mediafire.com/?hyaimu2mnzz 

Redlof Virus Remover

Redlof Remover is a free tool that removes the HTML.Redlof virus from your computer. The virus creates innumerable folder.htt and desktop.ini files in your computer.The virus slows down your computer terribly. Most antivirus program can only detect the virus but CANNOT remove it. Use this tool to remove the virus from your computer.

Download Link:http://www.mediafire.com/?nodznznld3t

 

Intel Processor Spec Finder

It provides Intel processor technical specifications in a searchable database format. 

                                Link:http://processorfinder.intel.com/

Free e-book download: "Introducing Windows Server 2008 R2"

  Download for free the Microsoft Press E-book “Introducing Windows Server 2008 R2” by Charle Russel and Craig Zacker

This is a great resource to learn about the new features of Windows Server 2008 R2 in the areas of virtualization & management, the Web application platform, scalability and reliability, and interoperability with Windows 7.

http://download.microsoft.com/download/5/C/0/5C0BD0AB-040D-4C56-A60B-661001012DDA/Windows_Server_2008_R2_e-book.pdf

NTOSKRNL missing or corrupt

Start the windows in recovery console, when you use the windows recovery console, you can obtain limited access to the NTFS file system,FAT, and FAT32 volumes without strating the windows graphical user interface(GUI).Only an administrator can obtain access to the windows recovery Console so that unauthorized users cannot use any system volumes.To strat the the windows recovery console ,use the one of the following methods

Use the windows setup floppy disks or the windows CD-ROM to strat the your computer.Make sure the first bootable device is CDROM/floppy as per you used to setup the computer.

The setup menu will appear on boot up.To start the windows recovery console press the “R” key.

In the next windows you will be prompted to select the windows installation to reapir(usually just “1”)

Then press the Enter key after typing the number that you want to use.

Next you will prompted to enter the administrator account password.if you did not enter on setup leave blank and press the Enter key

If youy use an incorrect password three times, the windows recovery console quits.also, if the security accounts manager database is missing or damaged,you cannot use the windowsrecovery console because you cannot have correct authentication.after you enter your password and the windows Recoveryt console strats,

Ok now we are in recovery console mode.

Type “cd i386” without quotes,then press enter

Type “expand ntkrnlmp.ex_ c:\windows\system32\ntoskrnl.exe”

Press enter .type exit and restart the windows

NTLDR or NTDETECT.COM is missing or not found

Start the windows in recovery console,

If NTLDR is missing,

Type “copy X:\i386\NTLDR C:\” press enter

If NTDETECT.COM is missing

Type “copy x:\i386\NTDETECT.COM C:\”

Use the letter of your CD for the letter “X” in the above commands

Windows could not start because the following file is missing or corrupt system32\deivers\fastfat.sys

This is due to the following reasons

1.fastfat.sys file is damaged or missing

2.The RAM in computer is damaged or it is not installed correctly.Here it is the solution:

Use recovery console option

At command prompt type

“cd system32\drivers” press ENTER

“dir fastfat.sys press” ENTER

“ren fastfat.sys fastfat.old” press ENTER

If it is not working try the following

Type the CD-ROM drive letter then press ENTER

Type “cd i386” press ENTER

Type “expand fastfat.sy_ c:\winnt\system32\drivers\fastfat.sys press ENTER

Type “C:\” press ENTER

Restart the machine

Your computer does not strat if the system hive is too large

In windows 2000 system could not start because the following file is missing or corrupt:

\WINNT\system32\config\systemced stratup option for windows 2000,press F8

This is may occure if windows cannot allocate enough memory to system hive.The system hive is typically around 3MB,but when it is highly fragmented or damaged,its size may increase greatly.If a large number number of programs have been installed and removed on your computer,or the computer shares a large number of resources,the registry become too large.

SOLUTION

1.Repalce the system Hive.

In Recovery console,type

“Copy C:\WINNT\repair\system C:\WINNT\system32\config\system “

If prompt for overrite file press Y on keyboard.

2.Restore the system file from the system.ALT backup file.

In recovery console,

Copy C:\WINNT\system32\config\system.alt c:\WINNT\system32\config\system

Press ENTER and type EXIT to restart.

Stop 0x00000077 or KERNEL_STACK_INPAGE_ERROR

The Stop 0x77 message indicates that a page of kernel data requested from the paging (virtual memory) file could not be found or read into memory. This Stop message can also indicate disk hardware failure, disk data corruption, or possible virus infection.
Possible Resolutions:

• Stop 0x77 messages can be caused by bad sectors in the virtual memory paging file or a disk controller error. In extremely rare cases, depleted nonpaged pool resources can cause this error. If the first and third parameters are zero, the stack signature in the kernel stack is missing, which is an error typically caused by defective hardware. If the I/O status is 0xC0000185 and the paging file is on a SCSI disk, check for cabling and termination issues. An I/O status code of 0xC000009C or 0xC000016A indicates that the requested data could not be found. You can try to correct this by restarting the computer. If a problem with disk integrity exists, Autochk, a program that attempts to mark bad disk sectors as defective so that they are not used in the future, starts automatically. If Autochk fails to run, you can manually perform the integrity check yourself by following the instructions to run Chkdsk provided in "Stop 0x00000024 or NTFS_FILE_SYSTEM" earlier in this list.

• Another cause of Stop 0x77 messages is defective, malfunctioning, or failed memory hardware, such as memory modules, Level 2 (L2) SRAM cache, or video adapter RAM. If you added new hardware recently, remove and replace it to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the system manufacturer to determine if the component has failed.

• The problem might also be due to cracks, scratched traces, or defective components on the motherboard. If all else fails, take the system motherboard to a repair facility for diagnostic testing.

• Problems that cause Stop 0x77 messages can also cause Stop 0x7A messages. For more information about Stop 0x7A messages, see "Stop 0x0000007A or KERNEL_DATA_INPAGE_ERROR" later in this list.

How to Enable Telnet in Windows 7

Follow these simple steps to add the telnet command to your command line tools.
Click on “Start Button”

Click on “Control Panel (menu item)” in “Start menu”

 Click on “Uninstall a program (link)” in “Control Panel”

 

 

Click on “Turn Windows features on or off (link)” in “Programs and Features”

Click in “Windows Features” box and find the “Telnet Client” check box

Allow the system to install the appropriate files – should take only a few seconds to a minute or so.

To test the functionality:

Click on the “Start button”

Click on “Search Box” in “Start menu”

Type “telnet” and hit “enter”. You should now see the Microsoft Telnet> prompt

Install Telnet Client by using a command line

If you hate GUI mode Dont worry

To install Telnet Client by using a command line.

   1.Open a command prompt window. Click Start, type cmd in the Start Search box, and then

      press ENTER.

   2.Type the following command:

      pkgmgr /iu:"TelnetClient"

   3. If the User Account Control dialog box appears, confirm that the action it displays is what 

      you want, and then click Continue.

   4.When the command prompt appears again, the installation is complete.

Change the GRUB Menu Timeout on Ubuntu

When your Ubuntu system boots, you will see the GRUB menu if you hit
the Esc key, or if you've enabled the

menu to show by default. The only issue with this is that the default
timeout is only 3 seconds. You may want to

increase this amount… or you may even want to decrease it.

Open up the /boot/grub/menu.lst file in your favorite text editor

sudo gedit /boot/grub/menu.lst

Now find the section that looks like this:

 ## timeout sec

# Set a timeout, in SEC seconds, before automatically booting the
default entry

 # (normally the first entry defined).

timeout 3

The timeout value is in seconds. Save the file, and when you reboot
you will have that many seconds to choose the menu item you want.

Debian shows on monitor as "Not Supported"

Boot into single user mode and do the
  'dpkg-reconfigure xserver-xorg' command.
There, to be safe start with only selecting 640x480 and 60Hz, when
given the choice.

DOS commands and equivalent linux commands

DOS commands	Linux command	Action
assign	ln	Create a file or directory link
/?	man	Help about the command
break on	trap	Trap ctrl-break / Trap signals
cd	cd	Change directory
chdir	pwd	Display directory location
cls	clear	Clear screen
copy	cp	Copy a file
date	date	Displays or sets the date
del	rm	Deletes one or more files
dir	ls	Displays a list of files and subdirectories in a directory
doskey /h	history	history List command history
echo	echo	Displays messages, or turns command-echoing on or off
edit	vim (or other editor)	Editor to edit files
exit	exit	Exit the command prompt
fc	diff	Compare two files and show differences
find	grep	Searches for a text string in a file or files
format	mke2fs or mformat	Formats a disk
find	grep	Look for a word in files given in command line
hostname	hostname	Print host name of computer
ipconfig	ifconfig	Display/configure network interface
mem	free	Displays the amount of used and free memory in your system
mkdir	mkdir	Create a Directory
more	more or even less	Displays output one screen at a time
move	mv	Moves files and renames files and directories
ping	ping	Send packets to a network host
route print	route -n	Print routing table
reboot	shutdown -r now	Reboot system
ren	mv	Renames a file or files
set	set or env	List all environment variables
tracert	traceroute	Show routes and router hops to given network destination
time	date	Displays or sets the system time
tasklist	ps -aux top	top List executable name, process ID number and memory usage of active processes
type	cat	Dump contents of a file to users screen
ver	Uname -a	Operating system/shell version
win	startx	Start x-windows
xcopy	cp -R	Copy all file of directory recursively

Interesting Firefox Scripts

 Copy and paste each scripts mentioned below on your address bar,and check what you will get

            
1.chrome://global/content/alerts/alert.xul


2.chrome://browser/content/preferences/preferences.xul


3.chrome://browser/content/bookmarks/bookmarksPanel.xul

4.chrome://browser/content/history/history-panel.xul

5.chrome://global/content/console.xul

6.chrome://global/content/finddialog.xul

7.chrome://mozapps/content/profile/profileSelection.xul

8.chrome://global/content/printdialog.xul

9.chrome://global/content/filepicker.xul

Windows 7 Black Screen Of Death Error Fixing Tool

A new kind of problem has been observed with some of the Windows 7 PC
called the Black Screen of Death. This black screen of death is not
like the Blue Screen Of Death (BSOD) as experienced with earlier
version of Windows. 

 

Symptoms of Black Screen of Death:

    After logging on there is no desktop, task bar, system tray or
side bar. Instead you are left with a totally black screen and a
single My Computer Explorer window. Even this window might be
minimized making it hard to see.

When there is black unresponsive screen on Windows 7 and you can not
see any icon or any active Window, please follow the steps below :

1. Restart the Computer and login with the login and password that you
use.

2. If the black screen appears and there is no icon visible on screen,
Press the “ALT + CTRL + DEL” keys on the keyboard together.

3. On Task Manager, go to Application Tab and Click on New Task type
'explorer.exe'

4.Download this tool from our mediafire onlinse file sharing media

Download Link:http://www.mediafire.com/?m5j0i0lfmjn

5.xecute the application.

6.Restart the windows.

7.If Explorer.exe command not executed use any windows Live CD,and run
this Fix

Check for more utilities

www.rrccochin.tk

Make Arobat Reader 6 load faster

Here's how to do it:

1. Go to C:\Program Files\Adobe\Acrobat 6.0\Reader (replace the C if you installed on another drive).

2. Create a new folder called plug_ins_disabled.

3. Move all files from the plug_ins folder to the plug_ins_disabled
folder except EWH32.api,

printme.api, and search.api. There should only be these 3 files in the
plug_ins folder.

4. You're done.

STOP C0000218 Registry failure in WINXP

You need to start the Recovery Console, create a temporary folder,
back up the existing registry files to a new location, delete the
registry files at their existing location, and then copy the registry
files from the repair folder to the System32\Config folder. When you
have finished this procedure, a registry is created that you can use
to start Windows XP. This registry was created and saved during the
initial setup of Windows XP. Therefore any changes and settings that
occurred after the Setup program was finished are lost.

To complete part one, follow these steps:
1.Insert the Windows XP startup disk into the floppy disk drive, or
insert the Windows XP CD-ROM into the CD-ROM drive, and then restart
the computer.
Click to select any options that are required to start the computer
from the CD-ROM drive if you are prompted to do so.
2.When the "Welcome to Setup" screen appears, press R to start the
Recovery Console.
3.If you have a dual-boot or multiple-boot computer, select the
installation that you want to access from the Recovery Console.
4.When you are prompted to do so, type the Administrator password. If
the administrator password is blank, just press ENTER.
5.At the Recovery Console command prompt, type the following lines,
pressing ENTER after you type each line:
md tmp
copy c:\windows\system32\config\system c:\windows\tmp\system.bak
copy c:\windows\system32\config\software c:\windows\tmp\software.bak
copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
copy c:\windows\system32\config\security c:\windows\tmp\security.bak
copy c:\windows\system32\config\default c:\windows\tmp\default.bak

delete c:\windows\system32\config\system
delete c:\windows\system32\config\software
delete c:\windows\system32\config\sam
delete c:\windows\system32\config\security
delete c:\windows\system32\config\default

copy c:\windows\repair\system c:\windows\system32\config\system
copy c:\windows\repair\software c:\windows\system32\config\software
copy c:\windows\repair\sam c:\windows\system32\config\sam
copy c:\windows\repair\security c:\windows\system32\config\security
copy c:\windows\repair\default c:\windows\system32\config\default
6.Type exit to quit Recovery Console. Your computer will restart.
Note This procedure assumes that Windows XP is installed to the C:
\Windows folder. Make sure to change C:\Windows to the appropriate
windows_folder if it is a different location.

If you have access to another computer, to save time, you can copy the
text in step five, and then create a text file called
"Regcopy1.txt" (for example). To use this file, run the following
command when you start in Recovery Console:
batch regcopy1.txt
With the batch command in Recovery Console, you can process all the
commands in a text file sequentially. When you use the batch command,
you do not have to manually type as many commands.

Stop 0x0000001E or KMODE_EXCEPTION_NOT_HANDLED

The Stop 0x1E message indicates that the Windows XP kernel detected an illegal or unknown processor instruction. The problems that cause Stop 0x1E messages share similarities with those that generate Stop 0xA errors in that they can be due to invalid memory and access violations. This default Windows XP error handler typically intercepts these problems if error-handling routines are not present in the code itself.

Possible Resolutions:

• Stop 0x1E messages typically occur after installing faulty drivers or system services, or they can indicate hardware problems, such as memory and IRQ conflicts. If a Stop message lists a driver by name, disable, remove, or roll it back to correct the problem. If disabling or removing applications and drivers resolves the issue, contact the hardware manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, and CD mastering tools.

• If the Stop message mentions the file Win32k.sys, the source of the error might be a third-party "remote control" program. If such software is installed, you might be able to disable it by starting the system in safe mode. If not, use Recovery Console to manually delete the system service file that is causing the problem.

• Problems can result from system firmware incompatibilities. Many Advanced Configuration and Power Interface (ACPI) issues can be resolved by updating to the latest firmware.

• Other possible causes include insufficient disk space while installing applications or performing certain functions that require more memory. You can free up space by deleting unneeded files. Use Disk Cleanup to increase available disk space. From Recovery Console, remove temporary files (those with .tmp file extensions), Internet cache files, application backup files, and .tmp files generated by Chkdsk.exe or Autochk.exe. You can also choose to install additional applications to another hard disk with more free space or move data files, paging files, and so on.

• The problem might be due to a memory leak caused by an application or service that is not releasing memory correctly. Poolmon (Poolmon.exe) helps you to isolate the components that are causing kernel memory leaks. For more information about troubleshooting memory leaks, see Microsoft Knowledgebase articles Q177415, "How to Use Poolmon to Troubleshoot Kernel Mode Memory Leaks," and Q298102, "Finding Pool Tags Used by Third Party Files Without Using the Debugger."

Stop 0x0000000A or IRQL_NOT_LESS_OR_EQUAL

The Stop 0xA message indicates that a kernel-mode process or driver attempted to access a memory location to which it did not have permission, or at a kernel interrupt request level (IRQL) that was too high. A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own. This Stop message is typically due to faulty or incompatible hardware or software.

Possible Resolutions:

• A Stop 0xA message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, and CD mastering tools.

• A Stop 0xA message might also be due to failing or defective hardware. If a Stop message points to a category of devices (video or disk adapters, for example), try removing or replacing the hardware to determine if it is causing the problem.

• If you encounter a Stop 0xA message while upgrading to Windows XPl, the problem might be due to an incompatible driver, system service, virus scanner, or backup. To avoid problems while upgrading, simplify your hardware configuration and remove all third-party device drivers and system services (including virus scanners) prior to running setup. After you have successfully installed Windows XP, contact the hardware manufacturer to obtain compatible updates.

Stop 0x00000024 or NTFS_FILE_SYSTEM

The Stop 0x24 message indicates that a problem occurred within Ntfs.sys, the driver file that allows the system to read and write to NTFS file system drives. A similar Stop message, 0x23, exists for the file allocation table (FAT16 or FAT32) file systems.

Possible Resolutions:

• Malfunctioning SCSI and Advanced Technology Attachment (ATA) hardware or drivers can also adversely affect the system's ability to read and write to disk, causing errors. If using SCSI hard disks, check for cabling and termination problems between the SCSI controller and the disks. Periodically check Event Viewer for error messages related to SCSI or FASTFAT in the System log or Autochk in the Application log.

• Verify that the tools you use to continually monitor your system, such as virus scanners, backup programs, or disk defragmenters are compatible with Windows XP. Some disks and adapters come packaged with diagnostic software that you can use to run hardware tests.
To test hard disk or volume integrity

Method 1:

1. In the Run dialog box, in the Open box type:
cmd

2. Start the Chkdsk tool, which detects and attempts to resolve file system structural corruption. At the command prompt type:
chkdsk drive: /f

Method 2:

1. Double-click My Computer, and then select the hard disk you want to check.
2. On the File menu, click Properties.
3. Click the Tools tab.
4. In the Error-checking box, click Check Now.
5. In Check disk options, select the Scan for and attempt recovery of bad sectors check box. You can also select the Automatically fix file system errors check box.

If the volume you are checking is in use, a message asks whether you want to delay disk error checking until the next time you restart your computer. After you restart, disk error checking runs and the volume chosen is not available to run other tasks during this process. If you cannot restart the computer due to the error, use safe mode or Recovery Console.

If you are not using the NTFS file system, and the system partition is formatted with the file allocation table (FAT16 or FAT32) file system, long file name (LFN) information can be lost if hard disk tools are started from an MS-DOS command prompt. A command prompt appears when using a startup floppy disk or when using the command prompt startup option on multiple boot systems that use FAT16 or FAT32 partitions with Microsoft® Windows® 95 OEM Service Release 2 (OSR2), Microsoft® Windows® 98, or Microsoft® Windows® Millennium Edition (Me) installed. Do not use tools meant for other operating systems on Windows XP partitions!

• Nonpaged pool memory might be depleted, which can cause the system to stop. You can resolve this situation by adding more RAM, which increases the quantity of nonpaged pool memory available to the kernel.

Stop 0x0000003F or NO_MORE_SYSTEM_PTES

The Stop 0x3F message indicates one or more of the following problems:

• The system Page Table Entries (PTEs) are depleted or fragmented due to the system performing a large number of input/output (I/O) actions.

• A faulty device driver is not managing memory properly.

• An application, such as a backup program, is improperly allocating large amounts of kernel memory.

Possible Resolutions:

• Stop 0x3F messages can occur after installing faulty drivers or system services. If a file name is given, you need to disable, remove, or roll back that driver. Disable the service or application and confirm that this resolves the error. If so, contact the hardware manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, and CD mastering tools.

• The system might not actually be out of PTEs, but a contiguous memory block of sufficient size is not available to satisfy a driver or application request. Check for the availability of updated driver or application files and consult the hardware or program documentation for minimum system requirements.

• Another cause is excessive demands for system PTE by applications. This situation is more common in server environments. Windows XP Professional provides a registry entry, SystemPages, that you can use to increase the number of PTEs allocated.
Caution

o Do not edit the registry unless you have no alternative. The registry editor bypasses standard safeguards, allowing settings that can damage your system, or even require you to reinstall Windows. If you must edit the registry, back it up first...

To increase the number of PTEs allocated in the registry
1. In the Run dialog box, and in the Open box, type: regedit

2. In the registry editor, navigate to the subkey HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\
Session Manager\Memory Management.

3. Double-click on PagedPoolSize and SystemPages to view the value for each entry.

4. If PagedPoolSize is not zero, assign a value of 0.

5. If SystemPages is not zero, assign a value of 40000 for systems with 128 MB (or less) of memory, or 110000 for systems with 128 MB to 256 MB of memory. For systems with more memory, do not increase the SystemPages value above 110000 without contacting Microsoft technical support.

6. Click OK, and then close the registry editor.

7. Restart your computer.

Stop 0x0000002E or DATA_BUS_ERROR

The Stop 0x2E message indicates a system memory parity error. The cause is typically failed or defective RAM (including motherboard, Level 2 cache, or video memory), incompatible or mismatched memory hardware, or when a device driver attempts to access an address in the 0x8xxxxxxx range that does not exist (does not map to a physical address). A Stop 0x2E message can also indicate hard disk damage caused by viruses or other problems.

Possible Resolutions:

• Stop 0x2E is typically due to defective, malfunctioning, or failed memory hardware, such as memory modules, Level 2 (L2) SRAM cache, or video adapter RAM. If you added new hardware recently, remove and replace it to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the system manufacturer to determine if the component has failed.

• Stop 0x2E messages can also occur after installing faulty drivers or system services. If a file name is given, you need to disable, remove, or roll back that driver. Disable the service or application and confirm that this resolves the error. If so, contact the hardware manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, and CD mastering tools.

• Hard disk corruption can also cause this Stop message.

• The problem might also be due to cracks, scratched traces, or defective components on the motherboard. If all else fails, take the system motherboard to a repair facility for diagnostic testing.

Stop 0x00000050 or PAGE_FAULT_IN_NONPAGED_AREA

The Stop 0x50 message indicates that requested data was not in memory. The system generates an exception error when using a reference to an invalid system memory address. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages.

Possible Resolutions:

• If you added new hardware recently, remove and replace the hardware to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the hardware manufacturer to determine if the component has failed.

• Stop 0x50 messages can also occur after installing faulty drivers or system services. If the file name is listed, you need to disable, remove, or roll back that driver. If not, disable the recently installed service or application to determine if this resolves the error. If this does not resolve the problem, contact the hardware manufacturer for updates. Using updated drivers and software is especially important for network interface cards, video adapters, backup programs, multimedia applications, antivirus scanners, and CD mastering tools. If an updated driver is not available, attempt to use a driver from a similar device in the same family. For example, if printing to a Model 1100C printer causes Stop 0x50 errors, using a printer driver meant for a Model 1100A or Model 1000 might temporarily resolve the problem.

Stop 0x00000079 or MISMATCHED_HAL

The Stop 0x79 message indicates that the hardware abstraction layer (HAL) and the kernel type for the computer do not match. This error most often occurs when ACPI firmware settings are changed. For example, you might install Windows XP on an x86-based computer with the firmware ACPI enable option enabled and later decide to disable it. This error can also result when mismatched single and multi-processor configuration files are copied to the system.

Possible Resolutions:

• A Stop 0x79 message occurs when the system is using out-of-date Ntoskrnl.exe or Hal.dll files. This can occur after manual repairs that involve copying incorrect files to the system. This error also occurs when using mismatched files, such as copying a multiprocessor HAL on to a system using a single-processor kernel (or vice versa). The kernel and HAL files for single-processor and multiprocessor systems are stored on the Windows XP Professional operating system CD using two different file names. For example, the single and multi-processor versions of the kernel, named Ntoskrnl.exe and Ntkrnlmp.exe respectively. Setup copies either Ntoskrnl.exe or Ntkrnlmp.exe to your system as Ntoskrnl.exe. In Recovery Console, you can use the Copy command to copy the correct HAL or kernel files from the CD to the appropriate folder on the hard disk.

• If you experience Stop 0x79 messages after changing firmware settings, restore the original settings used during Windows XP Professional Setup.

Because systems that use the ACPI HAL ignore IRQ assignments stored in firmware, you can only manually change IRQ settings for non-ACPI (Standard PC HAL) systems. Some x86-based provide the option to toggle ACPI functionality. To disable or re-enable ACPI, you must change firmware settings and reinstall Windows XP. Because of the numerous registry and system file changes required, you must run Setup again (an upgrade installation does not work).

Stop 0x0000007A or KERNEL_DATA_INPAGE_ERROR

The Stop 0x7A message indicates that a page of kernel data was not found in the paging (virtual memory) file and could not be read into memory. This might be due to incompatible disk or controller drivers, firmware, or hardware.

Frequently, the cause of this error can be determined from the second parameter, the I/O status code. Some common status codes are:

• 0xC000009A, or STATUS_INSUFFICIENT_RESOURCES, indicates a lack of nonpaged pool resources.

• 0xC000009C, or STATUS_DEVICE_DATA_ERROR, indicates bad blocks (sectors) on the hard disk.

• 0xC000009D, or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose data or power cables, a problem with SCSI termination, or improper controller or disk configuration.

• 0xC000016A, or STATUS_DISK_OPERATION_FAILED, indicates bad blocks (sectors) on the hard disk.

• 0xC0000185, or STATUS_IO_DEVICE_ERROR, indicates improper termination, defective storage controller hardware, or defective disk cabling, or two devices attempting to use the same resources.

Possible Resolutions:

• Stop 0x7A can be caused by bad sectors in the virtual memory paging file, disk controller error, virus infection, or memory hardware problems. In extremely rare cases, depleted nonpaged pool resources can cause this error. If the first and third parameters are zero, the stack signature in the kernel stack is missing, an error typically caused by defective hardware. If the I/O status is 0xC0000185 and the paging file is on a SCSI disk, check for cabling and termination issues. An I/O status code of 0xC000009C or 0xC000016A indicates that the requested data could not be found. You can try to correct this by restarting the computer. If a problem with disk integrity exists, Autochk, a program that attempts to mark bad disk sectors as defective so that they are not used in the future, starts automatically. If Autochk fails to run, you can manually perform the integrity check yourself by following the instructions to run Chkdsk provided in "Stop 0x00000024 or NTFS_FILE_SYSTEM" earlier in this appendix.

• Another cause of Stop 0x7A messages is defective, malfunctioning, or failed memory hardware, such as memory modules, Level 2 (L2) SRAM cache, or video adapter RAM. If you added new hardware recently, remove and replace it to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the system manufacturer to determine if the component has failed.

• Check the hardware manufacturer's Web site for updates to disk adapter firmware or drivers that improve compatibility. Verify that your disks and controller support the same set of advanced features, such as higher transfer rates. If necessary, select a slower transfer rate if an update is not yet available. Consult your hardware or device documentation for more information.

IMPORTANT
o You can install disk controller drivers not present on the Windows XP Professional operating system CD by responding to the following prompt shortly after starting Setup:

o Press F6 if you need to install a third party SCSI or RAID driver.

o Press F6, and when prompted, provide the appropriate storage controller driver (ATA or SCSI) supplied by the manufacturer.

• The problem might also be due to cracks, scratched traces, or defective components on the motherboard. If all else fails, take the system motherboard to a repair facility for diagnostic testing.

• Problems that cause Stop 0x7A messages can also cause Stop 0x77 messages.

Stop 0x0000007B or INACCESSIBLE_BOOT_DEVICE

The Stop 0x7B message indicates that Windows XP has lost access to the system partition or boot volume during the startup process. Installing incorrect device drivers when installing or upgrading storage adapter hardware typically causes stop 0x7B errors. Stop 0x7B errors could also indicate possible virus infection.

The second parameter is very important because it can indicate whether the 0x7B Stop message was caused by file system issues or problems with storage hardware and drivers. Values of 0xC000034 or 0xC000000E typically indicate:

• Disks or storage controllers that are failing, defective, or improperly configured.

• Storage-related drivers or programs (tape management software, for example) that are not fully compatible with Windows XP Professional.

Possible Resolutions:

• During I/O system initialization, the controller or driver for the startup device (typically the hard disk) might have failed to initialize the necessary hardware. File system initialization might have failed because of disk or controller failure, or because the file system did not recognize the data on the boot device.

• Repartitioning disks, adding new disks, or upgrading to a new disk controller might cause the information in the Boot.ini file, or Boot Manager, to become outdated. If this Stop message occurs after installing new disks to your system, edit the Boot.ini file or adjust the Boot Manager parameters to allow the system to start. If the error occurs after upgrading the disk controller, verify that the new hardware is functioning and correctly configured.

• Verify that the system firmware and disk controller BIOS settings are correct and that the storage device was properly installed. If you are unsure, consult your computer's documentation about restoring default firmware settings or configuring your system to auto-detect settings. If the error occurs during Windows XP Professional setup, the problem might be due to unsupported disk controller hardware. In some cases, drivers for new hardware are not in the Windows XP Professional Driver.cab library, and you need to provide additional drivers to complete the Windows XP setup successfully. If this is the case, follow the hardware manufacturer's instructions when installing drivers. Periodically check for driver and firmware updates.

• Hard disk corruption can also cause this Stop message. For more information about checking hard disk integrity, see the instructions provided in "Stop 0x00000024 or NTFS_FILE_SYSTEM" earlier in this list.

• Problems that cause 0x7B errors might also cause Stop 0xED errors. For more information about 0xED Stop messages, see "Stop 0x0000007B or INACCESSIBLE_BOOT_DEVICE" later in this list.

Stop 0x0000007F or UNEXPECTED_KERNEL_MODE_TRAP

The Stop 0x7F message indicates that one of three types of problems occurred in kernel-mode:

• A condition that the kernel is not allowed to have or intercept (also known as a bound trap).

• Software problems.

• Hardware failures.

Possible Resolutions:

• Stop 0x7F messages are typically due to defective, malfunctioning, or failed memory hardware. If you added new hardware recently, remove and replace it to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the system manufacturer to determine if the component has failed.

• Running the CPU beyond the rated specification, known as "overclocking," can cause Stop 0x7F or other error messages due to heat buildup. When diagnosing problems on overclocked systems, first restore all clock and bus speed settings to the manufacturer recommended values to determine if this resolves the issues.

• The problem might also be due to cracks, scratched traces, or defective components on the motherboard. If all else fails, take the system motherboard to a repair facility for diagnostic testing.

• Stop 0x7F messages can occur after installing incompatible applications, drivers, or system services. Contact the software manufacturer about possible Windows XP specific updates. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, and CD mastering tools.

Stop 0x0000009F or DRIVER_POWER_STATE_FAILURE

The Stop 0x9F message indicates that a driver is in an inconsistent or invalid power state.

Possible Resolutions:

• Stop 0x9F messages can occur after installing faulty applications or drivers or system services. If a file is listed by name and you can associate it with an application, uninstall the application. For drivers, disable, remove, or roll back that driver to to determine if this resolves the error. If it does, contact the hardware manufacturer for a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, and CD mastering tools.

• For information about troubleshooting standby and hibernate mode issues, see KB article Q266169, "How to Troubleshoot Problems with Standby Mode, Hibernate Mode, and Shutting Down Your Computer in Windows 2000."

Stop 0xBE or ATTEMPTED_WRITE_TO_READONLY_MEMORY

The Stop 0xBE message indicates that a driver attempted to write to read-only memory.

Possible Resolutions:

• A Stop 0xBE message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.

Stop 0xC2 or BAD_POOL_CALLER

The Stop 0xC2 message indicates that a kernel-mode process or driver incorrectly attempted to perform memory operations in the following ways:

• By allocating a memory pool size of zero bytes.
• By allocating a memory pool that does not exist.
• By attempting to free a memory pool that is already free.
• By allocating or freeing a memory pool at an IRQL that was too high.

This Stop message is typically due to a faulty driver or software.

Possible Resolutions:

• A Stop 0xC2 messages might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.

• A Stop 0xC2 messages might also be due to failing or defective hardware. If a Stop message points to a category of devices (such as disk controllers, for example), try removing or replacing the hardware to determine if it is causing the problem.

• If you encounter a Stop 0xC2 message while upgrading to Windows XP, the problem might be due to an incompatible driver, system service, virus scanner, or backup. To avoid problems while upgrading, simplify your hardware configuration and remove all third-party device drivers and system services (including virus scanners) prior to running setup. After you have successfully installed Windows XP, contact the hardware manufacturer to obtain compatible updates.

Stop 0x000000CE or DRIVER_UNLOADED_WITHOUT _CANCELLING_PENDING_OPERATIONS

This Stop messages indicates that a driver failed to cancel pending operations before exiting.

Possible Resolutions:

• Stop 0xCE messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.

Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL

The Stop 0xD1 messages indicates that the system attempted to access pageable memory using a kernel process IRQL that was too high. Drivers that have used improper addresses typically cause this error.

Possible Resolutions:

• Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.

Stop 0x000000EA or THREAD_STUCK_IN_DEVICE_DRIVER

A device driver problem is causing the system to pause indefinitely. Typically, this problem is caused by a display driver waiting for the video hardware to enter an idle state. This might indicate a hardware problem with the video adapter or a faulty video driver

.

Possible Resolutions:

• Stop 0xD1 messages can occur after installing faulty drivers (especially video drivers) or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.

Stop 0x000000ED or UNMOUNTABLE_BOOT_VOLUME

The kernel mode I/O subsystem attempted to mount the boot volume and it failed. This error might also occur during an upgrade to Windows XP Professional on systems that use higher throughput ATA disks or controllers with incorrect cabling. In some cases, your system might appear to work normally after you restart.

Possible Resolutions:

• If using higher throughput ATA disks and controllers, those capable of data transfer rates above 33.3 megabytes per second, replace the standard 40-pin cable with an 80-pin cable. Using an 80-pin cable is optional for transfer rates up to and including 33.3 megabytes per second, but is mandatory for higher transfer rates. The additional grounded pins are required to avoid data loss.

• Some firmware enables you to force higher transfer rates even when you are using the incorrect cable type. Your firmware might issue a warning but allow the startup process to proceed. Restore the default firmware setting for ATA cable detection.

• Problems that cause 0xED errors might also cause Stop 0x7B errors. For more information about 0x7B Stop messages, see "Stop 0x0000007B or INACCESSIBLE_BOOT_DEVICE" earlier in this appendix.

Stop 0xC0000221 or STATUS_IMAGE_CHECKSUM_MISMATCH

This Stop message indicates driver, system file, or disk corruption problems (such as a damaged paging file). Faulty memory hardware can also cause this Stop message to appear.

Possible Resolutions:

• You can use Driver Rollback or System Restore from safe mode, to restore a previous driver. You can also use Windows XP Professional recovery features such as the Last Known Good Configuration startup option, Backup, or Automated System Recovery to restore a previous working configuration. After restoring from backup media, you might need to reapply service packs or hotfixes, depending on when the backups were made.

• If the Stop message names the specific file, try replacing it manually with a fresh copy from the Windows XP Professional operating system CD using safe mode or Recovery Console. For systems using the FAT16 or FAT32 file system, you have the option of using a Windows 98 or Windows Millennium Edition Emergency Boot Disk to access the hard disk.
If the original file from the operating system CD has a file name that ends with an underscore (_) character, you cannot use the file until it is uncompressed. The Recovery Console's Copy command is ideal for copying compressed files because it detects and expands them. If you do not specify a destination file name, you must rename the expanded file with the correct extension before using it. From safe mode or Recovery Console, you can use the Expand command to uncompress and copy a file to a destination location. In Recovery Console, the expanded file is given the correct name after being copied to the destination location. For more information about the Copy or Expand commands, see Windows XP Help and Support Centre.

Fix Windows Restrictions and Errors With XPQuickFix -All-In-One-Virus Removal Tools

XPQuickFix is a portable freeware utility which lets you fix windows errors and remove restrictions caused due to virus and worms infection. It can correct 25 common Windows XP problems such as enable the Task Manager, enable Registry Editor, fix a CD autoplay, enable folder options.

It lets you restore the following set restrictions

• Enable Task Manager
• Enable Registry Editor
• Stop My Documents open at startup
• Enable Folder Options
• Restore missing Run dialog box
• Enable Command Prompt
• Restore My Computer (Computer) properties
• Restore Device Manager
• Fix delay in opening Explorer
• Restore grayed Explorer and Taskbar toolbars
• Restore My Documents properties
• Remove OEM splash and wallpaper
• Restore My Network Places to Desktop
• Enable Recovery Console
• Restore grayed file associations
• Fix right-click error
• Fix slow network file/shared/remote
• Restore Network icon to system tray
• Fix slow hotkeys
• Fix CD/DVD drive is missing or not recognized
• Fix CD autoplay
• Restore “Send To” context menu item
• Restore the native ZIP file integration
• Fix error 1606 couldn’t access network location
• Error when trying to access Add or Remove/ Program and Features program

Download it from rrccochin's file sharing media

Download Link:http://www.mediafire.com/?gmd1njnwcmd

Appremover -All Antivirus uninstaller

App Remover is a free to use tool which lets you remove any type of anti virus on your computer and can also remove the failed uninstallation from your computer, removes those programs and application which are failed to get uninstalled.

It can remove following antivirus products including Avast, AVG, Avira, BullGuard, CA, ClamWin, ESET, F-Secure, Kaspersky, Lavasoft, McAfee, Microsoft, Norman, Panda, Sophos, Symantec, TrendMicro, TrustPort and almost any program on yourcomputer which cannot be removed through windows normally.

Download Link:http://www.mediafire.com/?knzqw3vwn5j

Windows Update Removal Tool

Most of the Windows users will enable automatic updates. These updates may sometimes lead to disastrous situations leading to many technical problems. If you are facing this problem, here is a software called Windows XP Update Remover which resolves it and remove the newly installed updates and restore the system to its previous state. These Windows XP Automatic Updates will check the Windows Updates Web site for new high-priority Windows security patches, critical updates hot fixes, service packs, etc to protect the computer from the latest possible security threats.

 Windows XP Update Remover is a freeware Windows software which lets users to quickly and completely remove or uninstall the updates installed in the computer.This will remove $NtUninstall backup folders and associated uninstalled information from the computer. The user can see the list of updates installed on the computer so that you can choose the updates to be removed.

Download Link:http://www.mediafire.com/?ja1g2molyj4

Clonezilla- Ghost Utility for Linux

  



You're probably familiar with the popular proprietary commercial package Norton Ghost®, and its OpenSource counterpart, Partition Image. The problem with these software packages is that it takes a lot of time to massively clone systems to many computers. You've probably also heard of Symantec's solution to this problem, Symantec Ghost Corporate Edition® with multicasting. Well, now there is an OpenSource clone system (OCS) solution called Clonezilla with unicasting and multicasting!

    Clonezilla, based on DRBL, Partition Image, ntfsclone, partclone, and udpcast, allows you to do bare metal backup and recovery. Two types of Clonezilla are available, Clonezilla live and Clonezilla SE (server edition). Clonezilla live is suitable for single machine backup and restore. While Clonezilla SE is for massive deployment, it can clone many (40 plus!) computers simultaneously. Clonezilla saves and restores only used blocks in the harddisk. This increases the clone efficiency. At the NCHC's Classroom C, Clonezilla SE was used to clone 41 computers simultaneously. It took only about 10 minutes to clone a 5.6 GBytes system image to all 41 computers via multicasting!

Features of Clonezilla

    * Free (GPL) Software.
    * Filesystem supported: ext2, ext3, ext4, reiserfs, xfs, jfs of GNU/Linux, FAT, NTFS of MS Windows, and HFS+ of Mac OS. Therefore you can clone GNU/Linux, MS windows and Intel-based Mac OS, no matter it's 32-bit (x86) or 64-bit (x86-64) OS. For these file systems, only used blocks in partition are saved and restored. For unsupported file system, sector-to-sector copy is done by dd in Clonezilla.
    * LVM2 (LVM version 1 is not) under GNU/Linux is supported.
    * Multicast is supported in Clonezilla SE, which is suitable for massively clone. You can also remotely use it to save or restore a bunch of computers if PXE and Wake-on-LAN are supported in your clients.
    * Based on Partimage, ntfsclone, partclone, and dd to clone partition. However, clonezilla, containing some other programs, can save and restore not only partitions, but also a whole disk.
    * By using another free software drbl-winroll, which is also developed by us, the hostname, group, and SID of cloned MS windows machine can be automatically changed.

Limitations

    * The destination partition must be equal or larger than the source one.
    * Differential/incremental backup is not implemented yet.
    * Online imaging/cloning is not implemented yet. The partition to be imaged or cloned has to be unmounted.
    * Software RAID/fake RAID is not supported by default. It's can be done manually only.

Dowbload Its stable version;Download Link:http://biznetnetworks.dl.sourceforge.net/project/clonezilla/clonezilla_live_stable/1.2.2-26/clonezilla-live-1.2.2-26.iso