Samsung ML-1610 monolaser printer driver

Download Samsung ML-1610 mono laser printer driver for window XP

Check the link to download Samsung ML-1610 monolaser printer driver for windows xp 32 bit


Download Link:http://downloadcenter.​samsung.com/content/DR/200904/​20090403100304406/​SamsungUniversalPrintDriver.​exe

TVS MSP 345 Champion Plus Driver

                                    TVS MSP 345 Champion Plus Driver

Driver Download

Win 3.1

Win 95 / 98 / ME

Win NT

Win 2000

Win 2003

Win XP

Win Vista

Word Star 7

Word Perfect 5.1

Harvard Graphics

Linux

General Printer Troubleshooting

                          General Printer Troubleshooting

Supply Memory Error' displays on the control panel HP LaserJet Pro M1213nf Multifunction Printer

Issue

The product performs correctly, but 'Supply Memory Error' displays on the control panel.

Model: HP LaserJet Pro M1213nf Multifunction Printer

Solution

There might be packing material inside the product.

Perform the solutions below in the order presented until your issue is resolved.

Solution one: Check to make sure that there is no packing material inside the product

Follow the steps below in the order presented to remove all packing material from inside the product.

1.   Open the cartridge access door.

Figure 1: Open the cartridge access door

2.   Lift up the paper packing material, but do not remove it.

Figure 2: Lift the paper packing material

3.   Remove the print cartridge packing material.

Figure 3: Remove the print cartridge packing material

4.   Remove the print cartridge from the product.

CAUTION:

To prevent damage to the print cartridge, hold the print cartridge at each end.

5.   Figure 4: Remove the print cartridge

6.   

7.   Remove the packing material from inside the product.

Figure 5: Remove the packing material from inside the product

8.   Remove the orange clip from the end of the print cartridge.

Figure 6: Remove the orange clip from the print cartridge

9.   Gently rock the print cartridge back and forth to distribute the toner evenly.

Figure 7: Rock the print cartridge

10.Bend the tab on the left side of the print cartridge until the tab breaks loose. Pull the tab to remove all the sealing tape from the print cartridge.

Figure 8: Remove the sealing tape

CAUTION:

If toner gets on your clothing, wipe it off with a dry cloth, and then wash the clothing in cold water.Hot water sets toner into the fabric .

11.Insert the print cartridge, and then close the print cartridge door.

Figure 9: Insert the print cartridge, and then close the door

 

                                              Source:HP site

HP LaserJet P2055dn and P2055x Printers - Manual IP Setting through Control Panel

 

There are 3 ways to configure the IP address: HP ToolboxFX, embedded Web server (EWS) and the control panel on P2050 series printers (P2055n/P2055x). The control panel can be used to manually and automatically configure the IP address. This document describes how to configure the IP address manually using the control panel.

NOTE:

Specific automatic IP modes (such as BOOTP, DHCP, or AutoIP) can be changed by using the embedded Web server or HP ToolboxFX only. If AutoIP is disabled, HP default IP (192.0.0.192) will automatically be enabled.

1. On the control panel, press OK .
2. Use the arrow buttons to select Network config. , and then press OK .
3. Use the arrow buttons to select CFG TCP/IP , and then press OK .
4. Use the arrow buttons to select BOOTP , make sure the value is No , and then press OK .
5. Use the arrow buttons to select DHCP , make sure the value is No , and then press OK .
6. Use the arrow buttons to select IP BYTE 1 , and then press OK .
7. Use the arrow buttons to change the value of IP BYTE 1 , and then press OK .
8. Repeat steps 6 and 7 for IP BYTE 2 , IP BYTE 3 , and IP BYTE 4 . Also, repeat steps 6 and 7 for the Subnet Mask (SM BYTE 1, SM BYTE 2, SM BYTE 3, SM BYTE 4 ) and Default Gateway (GW BYTE 1, GW BYTE 2, GW BYTE 3, GW BYTE 4 ).

   NOTE:

   Example: If the IP address is 192.168.0.1

   • IP byte 1=192
   • byte 2=168
   • byte 3 =0
   • byte 4 =1
9. Use the Back or Cancel button to leave the Network config. menu.
10. Settings will take effect after Step 9 and the printer has returned to Ready .

After performing the following procedure, print a Network Report page as follows:

1. Press OK
2. Press the down arrow to select Reports , and then press OK.
3. Press the down arrow to select the Network Report , and then press OK .

To make these settings permenant, press and hold the Cancel and down arrow keys simultaneously until "Permanent Storage init " displays on the control panel.

Print, scan and fax drivers for Linux

Installer Walkthrough

Step 1: Download the Automatic Installer (.run file)

Download HPLIP 3.10.5:

Download Link:http://space.dl.sourceforge.net/project/hplip/hplip/3.10.5/hplip-3.10.5.ru

Step 2: Run the Automatic Installer Running the installer requires that you open a command shell to enter commands. To do this, open a terminal or console window In the terminal/console, enter the following commands (type all the text after the $ character and then press enter): Note These instructions assume that the hplip-3.10.5.run file was downloaded to your Desktop directory. You may have to adjust the 'cd' command based on where your web browser saved the file on your system. Step 3: Select the Install Type Select the install mode: Automatic (enter an 'a') or Custom (enter a 'c'). We recommended that most users select the Automatic install mode Step 4: Verify your Linux Distribution Note Ensure the installer detected the correct Linux distribution. Different Linux versions use different install procedures if the incorrect version is selected, the installer may fail. Step 5: Select HPLIP Options to Enable Note Enter 'y' to enable parallel support. By default, parallel support is disabled. Step 6: Enter Your root/Superuser User Password Step 7: Read the Installation Notes Depending on your Linux distribution some steps may need to be completed before going further with the HPLIP install. Please follow any directions given. Step 8: Detect Any Missing Dependencies The installer will now detect what dependencies your system will need to install before installing HPLIP. In addition any package manager clean up steps will be ran. These are executed to try and minimze any potential package manager problems. Step 9: Download and Install Any Missing Dependencies If your system is missing any dependencies they are now downloaded and installed. Step 10: './configure' and 'make' will run ./configure prepares HPLIP for install as well as your system is verified to have all the required dependencies for HPLIP. 'make' is then executed. Make compiles ("builds") HPLIP for your system. Step 11: 'make install' is Run 'make install' is the actual install procedure, this step is where HPLIP is actually being installed to your system. Using 'hp-setup' to configure your printer This guide will walk you through configuring your printer using 'hp-setup'. Step 12: Select How Your Printer will be Connected to Your Computer The first step is to select the printer connection type: Step 13: Select the Printer to be Configured Next the setup tool will display printers detected (depending on the connection type selected): Step 14: Select the PPD file (or driver) to be Used for Your Printer The PPD files (drivers) which are most similar to your printer are displayed. Select the appropriate PPD file for your printer. Note Usually you will want to select the recommended PPD file. Step 15: Enter any Printer Information You Wish to Update/Change Enter your printer information: Step 16: Confirm the Printer Settings and Finish the Configuration Process Click "Finish" to complete the printer setup process:

There is no jammed paper in the machine, but still the Paper LED is ON or Flashing Brother HL 5250DN

Description:

Please follow the steps below to solve the problem:

Step 1: Make sure there is no jammed paper left in the printer.
Please open the back cover and then fuser cover again to see if there’s no paper inside the fuser cover.

Step 2: Make sure the paper is loaded in the paper tray.

Make sure the paper or other print media is loaded properly in the paper tray and that the guides are not too tight or too loose against the paper stack.

Step 3: Check the back cover.

Make sure that the back cover of the printer is securely closed.

Step 4: Check the printer driver setting.

NOTE: The steps and images may differ depending on the operating system being used.

1. Cancel the print job by either of the following steps a or b:
   
   1. Click start => Settings => Printers & Faxes => Double click on the printer icon for your Brother machine => Click Printer and select Cancel All Documents.
      
      
      
      
   2. Press the JOB CANCEL or CANCEL key on the machine.
   
   

   Note

   If  you cannot cancel the print job, turn the machine power off and on.
   
   
2. Click on start => Settings => Printers & Faxes, and right click on the printer icon for your Brother machine and select Printing Preferences.
   
   
   
   
   
    
3. Click Basic tab and check the setting for Paper Source. Select the correct Paper Source and click on OK.
   
   
   
   

   Note

   You can use only A4, Letter or Legal for automatic duplex printing.
   
   
4. Retry printing.

Step 5: Make sure the Duplex Tray is set firmly.

Check if the Duplex Tray is set in the printer firmly.

1. Remove the Duplex Tray from the printer.
   
2. Reinstall the Duplex Tray into the printer firmly.

Clearing paper jams (for ML-1610, ML-1640, ML-2010, ML-2240, ML-2245)

STEP 1. In the paper feed area

[Overview]

Occasionally, paper can be jammed during a print job. Some of causes include:

• The tray is overfilled.

• The front cover has been opened during a print job.

• Paper that does not meet paper specifications has been used.

• Paper that is outside of the supported size range has been used.

If a paper jam occurs, the On Line/Error LED on the control panel lights red.

Find and remove the jammed paper. If it is invisible, look inside the printer.

[Solution]

1. In The Paper Feed Area

1) Remove any misfeed paper by pulling it out by the visible edge from the tray. Make sure that all of the paper is properly aligned in the tray.

2) Open and close the front or top cover to resume printing the document from failed pages.

STEP 2. Around the toner cartridge

2. Around The Toner Cartridge

1) Open the front cover.

2) Pull the toner cartridge out, and remove it from the printer.

3) If necessary, pull the manual tray out.

4) Gently pull the paper toward you.

5) Check that there is no other paper in the printer.

6) If necessary, push the manual tray back into the machine.

7) Reinstall the toner cartridge, and close the front cover. Your printer resumes printing the document from failed pages.

STEP 3. In the paper exit area

3. In The Paper Exit Area

Note: Paper jams in this area may result in loose toner on the page. If you get any toner on your clothes, wash them in cold water as hot water will set the toner into the fabric.

1) If the paper jams as it exits to the output tray and a long portion of the paper is visible, pull the paper straight out.

When you pull the jammed paper, if there is resistance and the paper does not move immediately, stop pulling. Continue with the next step.

2) Open the top cover and the inner cover.

Caution:

• When removing the jammed paper, be careful not to touch the heat roller (located underneath the inner cover.) It is hot and could cause burns!

• The top and inner cover themselves may also be hot due to the heat roller. Allow the printer to cool before opening the covers.

3) Loosen the paper if it is caught in the heat rollers. Then pull the paper gently out.

4) Close the inner cover and the top cover. Printing resumes automatically.

Note: Failed pages will not reprint. Try printing the pages

What do the LED indications mean?(Brother HL 5250DN)

Description:

The technical term for the lights on the front of your Brother machine is Light Emitting Diodes (LED's). This FAQ explains the meaning of those different LED indications.

When all the LEDs are off, the power switch is off or the printer is in Sleep mode.
Pressing the Go button wakes up the printer from Sleep mode to Ready mode.

---

[LED Indication]

The Toner LED alternates turning on for 2 seconds and off for 3 seconds.
The Status LED is on. (Green)

Meaning of LED Indication

Toner low:
Indicates that the toner cartridge is nearly empty. Purchase a new toner cartridge and have it ready for when Toner Life End is indicated.

---

[LED Indication]

The Toner LED is on.
The Status LED is on. (Red)

Meaning of LED Indication

Toner life end:
Replace the toner cartridge with a new one. To see how to replace the toner cartridge, click here.

Cartridge position error:
The drum unit assembly is not installed correctly. Take the drum unit out of the machine and put it back in.

---

[LED Indication]

The Drum LED alternates turning on for 2 seconds and off for 3 seconds.
The Status LED is on. (Green)
                                     
 

Meaning of LED Indication

Drum life end soon:
The drum unit is near the end of its life. We recommend that you obtain a new drum unit to replace the current one. To see how to replace the drum unit, click here.

---

[LED Indication]

The Toner LED and the Drum LED alternates turning on for 2 seconds and off for 3 seconds.
The Status LED is on. (Green)

Meaning of LED Indication

Toner low:Indicates that the toner cartridge is nearly empty. Purchase a new toner cartridge and have it ready for when Toner Life End is indicated.

Drum life end soon:
The drum unit is near the end of its life. We recommend that you obtain a new drum unit to replace the current one. To see how to replace the drum unit, click here.

---

[LED Indication]

The Paper LED is flashing.
The Status LED is on. (Red)

Meaning of LED Indication

No paper:Put paper in the paper tray or the MP (Multi-Purpose) tray or  the optional lower tray. Then press Go.

Paper jam:
Clear the paper jam. Click here to see how to clear paper jams. If the printer does not start printing, press Go.

Incorrect Paper size for Duplex:
Press Go or Job Cancel. Set the correct paper that you want to use, or load the same size paper that you selected in the current driver setting. The paper size you can use for automatic duplex printing is A4, Letter or Legal.

Duplex disabled:
Close the back cover of the printer and put the duplex tray back in.

---

[LED Indication]

The Status LED is on. (Red).

Meaning of LED Indication

Front cover is open:
Close the front cover of the printer.

Fuser cover is open:
Close the fuser cover which can be found behind the back cover of the printer.

Dust on drum:
The corona wire needs to be cleaned. Click here to see how to clean the corona wire of the drum unit.

Too many trays:
Maximum number of optional trays is two. Remove additional trays.

Buffer error:
Check the cable connection between the PC and printer.

Memory full:
The printer memory is full and the printer cannot print full pages of a document. Click here to see how to solve this problem.

Print overrun:
A print overrun occurred and the printer cannot print full pages of a document. Click here to see how to solve this problem.

Download full:
The download buffer of the printer is full. Add more memory to the printer. Click here to see how to install additional memory.

Font full:
The font memory area is full. Delete fonts or add more memory to the printer. Click here to see how to install additional memory.

---

[LED Indication]

All LEDs are flashing.

Meaning of LED Indication

Service call:

• If you see the service call indication shown above, turn off the power switch, wait a few seconds, and then turn it back on and try to print again.
• If you cannot clear the error and see the same service call indication after turning the printer back on, call your dealer or a Brother authorized service representative.

Tally Printer Drivesrs&Documents

1.Tally printer drive link : http://en.dascom.firma.cc/printer-drivers/serial-matrix.html

                                                                                                  

2.All Tally printer Documentation- User level and service level :   

http://en.dascom.firma.cc/documentation/serial-matrix/63-t2250.html